M.2 For Macbook 2012

Product description

This M.2 SATA B+M Key SSD adapter card is used to replace the ssd of your 2012 version MacBook Air.

Features:

1. Compatible 2012 MacBook models: A1465, A1466 ( MD223, MD224, MD231, MD232 ).

2. Can replace ssds as follows:

THNSNS064GMFP

THNSNS128GMFP

MZ-EPC5120/0A2 (512GB)

9.Compatible with M.2 SATA ssds with B+M key.

10.Supports ssd size: 2280, 2260, 2242, 2230.

11.Plug and play, no need drivers.

12.No extra power supply is required.

13.Adapter connector: 7+17 pin

14.Adapter size: 109mm*24mm / 4.29inch*0.95inch.

Notes:

1. Not support other MacBook models.

2. Not support M.2 PCI-E NVMe protocol ssds with M-key.

3. Before installation, please turn off the power and remove the battery of your MacBook.

4. T5 and 1.2 screwdrivers are required to disassemble the MacBook.

5. The compatibility of MacBook with other ssds is not that good. Please do not buy this item if you do not know computer DIY. It is recommended that beginners purchase the original SSD directly.

i The SSD is used normally on a non-MacBook, but it does not mean that it will be compatible on a MacBook.

ii The SSD is used normally on one MacBook, but it does not mean that it can be used normally on another MacBook.

iii SSDs with S-A-N-D-F-O-R-C-E controllers are not compatible with MacBooks.

iv S-a-n-D-i-s-k X400 Z400 Z400S series, not compatible with MacBooks.

v It is recommended to update the EFI and SSD firmware of MacBook to improve the compatibility of the motherboard with SSD and other devices.

Package includes:

1. M.2 SATA SSD Adapter Card *1;

2. Screw set *1;